منصة عالمية متكاملة لتوريد الآلات الهندسية
جلوبال ماتشكس
منصة عالمية متكاملة لتوريد الآلات الهندسية
جلوبال ماتشكس
SHACMAN F3000 Second-hand 6×4 Dump Truck WP10 340HP 20m³ Cargo Box For Mine Earth Transport

SHACMAN F3000 Second-hand 6×4 Dump Truck WP10 340HP 20m³ Cargo Box For Mine Earth Transport

USD $21481.00 / قطع

الحد الأدنى للطلب: 1 قطع

Chassis Model:
SX3255DR384
Drive Type:
6×4 10-wheel Rear Eight Dump Truck
Overall Dimension:
8620×2490×3450mm
Wheelbase:
3775+1400mm
السعر المرجعي:
USD $21481.00
الحد الأدنى لكمية الطلب:
1 قطع
إرسال استفسار

ميزات المنتج وتطبيقاته

Second-hand SHACMAN F3000 6×4 10-wheel dump truck, chassis model SX3255DR384, overall dimension 8620×2490×3450mm. Powered by Weichai WP10.340E32 340HP engine, matched with 9.5Ton Hande front axle & 16Ton hub-reduction rear axle with mine gear ratio 5.73/6.72. 5800×2300×1500mm around 20m³ high-strength wear-resistant cargo box (8mm floor, 6mm side wall), equipped with Hyva front multi-stage lifting cylinder. 12.00R20 heavy steel tires, WABCO double-circuit air brake with exhaust brake, thick multi-leaf spring suspension. Ideal for short-distance heavy haulage of sand, earth and ore, fully refurbished before delivery, mass exported to overseas infrastructure & mine projects.

  • Mine Adaptation Advantage Of 340HP Weichai Power + Hande Hub-reduction Axle
    WP10 340HP 9.726L inline 6-cylinder engine delivers 1350N·m high torque for strong start under full earth & ore load. 16Ton Hande tandem hub-reduction rear axle with low-speed mine ratio 5.73/6.72 provides excellent climbing capacity on muddy steep mine roads, impact-resistant hub structure avoids gear damage under long heavy load. Widely available global Weichai & Hande spare parts cut overseas mine maintenance cost.
  • Thick Leaf Spring Suspension & Heavy Chassis For Rough Construction Sites
    Multi-layer thick balanced leaf spring suspension buffers bumpy rough roads to prevent frame crack. 285mm min ground clearance avoids chassis scratch on gravel pits. 12.00R20 full steel heavy tires are puncture-resistant with sufficient load capacity for 30~35 ton cargo. Only 8.3m min turning diameter enables flexible turning in narrow urban construction yards & aggregate yards with wide versatility.
  • 20m³ Thick Wear-resistant Box With Hyva Hydraulic Lifting
    5.8m standard engineering box adopts 8mm floor & 6mm side high-strength wear steel with inner reinforcement ribs to prevent bulge under heavy load. Integrated wear-resistant floor eliminates residue for clean unloading. Hyva front multi-stage cylinder offers long stable lifting stroke, matched with rear anti-collision chain, side reflective guard and tarpaulin track to meet construction safety standards, suitable for multi-material transport of sand, muck and crushed rock.
  • Full WABCO Air Brake System For Driving Safety
    Equipped with WABCO dual-circuit split air brake, widened thick drum brake pads and standard exhaust brake for continuous auxiliary deceleration on long mountain downhill, greatly reducing pad wear. Optional ABS anti-lock system avoids tail flick during braking on rainy muddy roads, lowering heavy-load driving risks for mountainous overseas mines.
  • Standard Refurbishment Process For Second-hand Vehicle
    Retired from formal construction sites, all powertrain, axles and hydraulic components are original factory without modification. Full standardized overhaul finished before shipment: all wearable parts including oil seals, brake pads, tires, hydraulic seals and spring bushings replaced new. Chassis calibrated, derusted and repainted, hydraulic pressure test zero leakage. Full empty, loaded, lifting & braking road test passed, ready for direct construction operation after delivery.
  • Core Application Scenarios
    Urban construction muck haulage, short-distance aggregate transfer, small open-pit mine ore & crushed rock transport, rural road earthwork stock transfer. This refurbished SHACMAN F3000 10-wheel tipper is mainstream cost-effective dump truck for small & medium infrastructure mines in Central Asia & Africa.
  • One-stop Full Export Supporting Service
    ①Full vehicle maintenance list, power & hydraulic road test records and original complete configuration parameters supplied.
    ②Whole truck film wrapping, separate protection for cylinder, pipelines and lamps, solid wooden frame reinforcement for ocean shipping. 24-hour Chinese & English online technical support, bulk supply of Weichai filters, Hande axle spare parts, hydraulic seals and tires available.
    ③Dual-language maintenance manual for engine, chassis and hydraulic lifting provided, full basic export documents handling service available.
إرسال استفسار