Bucket Tooth 252117634 | Z5GN.30-5, XCMG Loader Bucket Ground Engaging Tool

A bucket tooth (also called shovel tooth, bucket tip, or ground engaging tool) is the core cutting wear part at the front edge of a loader bucket—equivalent to the loader's "teeth"—directly contacting soil, rock, ore, construction debris, and other materials to undertake the core tasks of digging, penetration, scraping, and breaking . A loader bucket tooth typically consists of two parts: a tooth holder (shank) and a tooth tip (point), joined and fixed by a pin; since wear and failure during operation occur mainly at the tooth tip, routine maintenance only requires replacing the tip while the holder can be used long-term .

Working-mechanism of bucket teeth in loading operations​ (based on public literature on construction-machinery design, as background reference for this part, not specific to this item):

• Reducing penetration resistance: When the bucket edge is fitted with bucket teeth, the teeth penetrate the material pile before the cutting edge; because the teeth have a small contact area and high specific pressure, they penetrate the pile more easily than a toothless cutting edge, reducing insertion resistance by about 20%—especially significant when loading high-density, high-resistance materials .

• Protecting the bucket body: As wear parts, bucket teeth bear the main abrasion and impact, preventing the bucket's front-edge blade from direct erosion and greatly extending the bucket's overall service life .

• Improving operational precision: The pointed-penetration characteristic of bucket teeth gives the operator a clear reference baseline in fine operations, facilitating control of loading depth and angle .

Classification and selection by working condition​ (as general background, not specific to this part):

By operating environment, bucket teeth are generally divided into three categories: rock teeth​ (for high-abrasion hard-rock conditions such as iron mines and quarries), earth-moving teeth​ (for conventional earthwork such as soil and sand-gravel), and conical teeth​ (for specific materials such as coal mines); bucket-tooth shapes also vary by loader brand . By tooth-tip cross-section, common designs in the market include chisel tooth, rock chisel, single tiger-tooth, and double tiger-tooth​ variants—chisel teeth have a wide working face, good wear resistance, and leave a flat bottom in grading work, suiting general transport, grading, and trenching; rock chisels offer strong penetration, suiting hard-rock breaking .

Material and process differences: By manufacturing process, bucket teeth are mainly divided into cast teeth​ and forged teeth—forged teeth are generally more wear-resistant and harder, with a service life about twice that of cast teeth, while priced at about 1.5 times that of cast teeth . High-manganese steel (e.g., ZGMn13) has extremely strong wear resistance and a work-hardening effect, suiting hard rock and sand-gravel; alloy steel (e.g., 45#, 65Mn) has good toughness and impact resistance, suiting earthwork and loose materials . Tooth-tip hardness typically ranges from HRC 47–54 or HB 300–500, requiring a trade-off between wear resistance and impact resistance based on working conditions .